Skip to main content
How does e-TOLL work
Updated over a week ago

How does it work

e-TOLL provides a modern and easy-to-use way to pay for toll roads.

This integration with e-TOLL will help drivers and fleet managers to manage payments for toll roads by automatically sending vehicle positions to e-TOLL system for instant toll road payment collection.

πŸ“˜ To use e-TOLL integration, your vehicle must be equipped with a certified device. A full list of certified devices by Mapon can be found here

πŸ”” Keep in mind! Integration management is available for administrators or users with unlimited access only.

Set up e-TOLL integration

1. Go to Settings section and open subsection Integrations

2. Find and select Poland e-TOLL integration tab

πŸ“˜ If you don't find this integration in the integration list, contact your Client Project Manager or Mapon Client Support.

3. Find the vehicle you want to register in the list of the e-TOLL solution and click REGISTER CAR.

πŸ“˜ Registration process can take up to 30 minutes.

4. When the e-TOLL system registers the vehicle, you will be provided with an OBU ID and PIN.

🚨 Enabling integration for the vehicle sends mandatory e-TOLL configuration to the device, which may increase mobile data consumption, therefore an additional subscription fee could be applied.

5. Go to your e-TOLL account (information for registration can be found here).

6. Register the vehicle in e-TOLL platform using OBU ID and PIN generated by Mapon.

πŸ“˜ Please, check your e-TOLL account for manuals on how OBU registration process has to be done in their system.

7. After the vehicle registration in the e-TOLL account is done, enable data forwarding to the e-TOLL system within Mapon platform.

πŸ“˜ A green switch indicates active data forwarding to the e-TOLL system, while a gray switch signifies that no data is being forwarded.

8. After data forwarding is activated, the e-TOLL integration is fully set up and ready to use.

πŸ”” Do not forget! As this integration has technical requirements we apply subscription fee for using it. Subscription fee applies to every registered vehicle (even if the data forwarding is switched off).

πŸ“˜ Coordinates will not be sent when the vehicle is outside Polish borders.

Did this answer your question?