Thank you for choosing Mapon fleet management solutions!
The package you received from Mapon contains a tracking device ready for easy setup!
Find the vehicle’s battery (see the vehicle’s handbook).
Remove the tracking device from the packaging.
Clean the battery’s surface with a degreasing agent.
Remove the protective film from the double-sided adhesive on the device.
Attach the device to the battery facing forward.
Connect the device to the battery’s terminals.
Connect the black wire to the battery's negative (-) terminal.
Connect the red wire to the battery’s positive (+) terminal.
After successfully connecting the device, a green diode will light up.
Log in to your Mapon account via www.mapon.com/new.
You’ll see the registered unit with the device’s serial number in the Map section. Click on the vehicle, then on three dots, choose Vehicle settings to change the number of the vehicle, and fill out its technical information.
Mapon does not take responsibility for the quality of device installation and losses incurred by the customer when installing the device while not following the steps specified in this instruction.