When you open the “Tasks and routes” solution (the Tasks tab on the 
Map) and plan some routes and tasks, you see icons that show the types of tasks and colors that show their progress.
Colors
Colors for vehicle status
Each vehicle marker changes color and icon based on the vehicle’s current status. This lets you check what is happening with your fleet just by looking at the map. For example, three vehicles in three different statuses:
Icon | Color | Status | Description |
| Green | Driving | A green icon means the vehicle is currently driving. |
| Orange | Stopped | An orange icon means the vehicle is stopped. |
| Yellow | Ignition | A yellow icon means the vehicle is standing still with the ignition on. |
| Black | No data | A black icon means there is currently no incoming data from the device. |
| Gray | No GPS | A gray icon means the vehicle has no GPS signal right now. |
| Dark blue | Private | A dark blue icon means the vehicle is in private mode. |
| Purple | Service | A purple icon means the vehicle is marked as in for service. |
| Light blue | Charging | A light blue icon means the vehicle is currently charging. |
| Teal | Stationary | A teal icon means the vehicle is parked and has not moved for a while. |
Colors in overview blocks
In the vehicle cards of the Fleet overview, the color of a task’s icon gives you a quick look at the task’s progress:
Green: task in progress, or waiting.
Blue: next task, not started yet.
Completed tasks are not shown in the vehicle cards, so the task icons there are green or blue:
For what each block of the card shows, see “What is the data that appears in the vehicle list?”.
Colors for route segments
Route segments on the map use the same colors as the task icons, with one addition:
Grey: route segments that have been completed.
Green: the route segment currently in progress. It is drawn as a wide dashed line along the planned route.
Yellow: a thinner dashed line whose dashes move in the direction of travel. It shows the actual path taken by the vehicle, updated in real time.
Blue: remaining route segments that have not been completed yet.
For more about the route colors, see “What do the route colors on the map mean?”.
Symbols
Apart from the colors, every task icon also has its own design, so you can quickly see which type of work is done during the task:
Loading: cargo loading at a specified location.
Unloading: cargo unloading at a specified location.
Fuelling: a refuelling stop.
Driver change: drivers are switched for the vehicle.
Trailer change: trailers are exchanged.
Hook off trailer: a trailer is disconnected from the vehicle.
Hook on trailer: a trailer is connected to the vehicle.
Resting: a scheduled driver rest period.
Ferry - port of departure: the port where the vehicle boards a ferry.
Ferry - port of arrival: the port where the vehicle leaves the ferry.
Train: a train transport segment in the route.
Border crossing: crossing a national or regional border.
Other: any other work that does not match the types above.
For each vehicle, you may also see icons for tachograph data:
See “Third block: Tachograph data” in “What is the data that appears in the vehicle list?”.