The “Overspeeding inside object” alert helps you monitor speeding in specific areas by notifying you when a vehicle exceeds the speed limit inside the selected objects.

This is useful for controlling vehicle behavior in locations such as warehouses, construction sites, customer areas, city centers, or any other zones where speed restrictions are especially important.

✅ An object is a geozone or geofence — a virtual area marked on the map, such as a warehouse, customer location, parking area, city zone, or any other location you want to monitor.

How to set up

Go to Settings -> Alert settings.
Click ADD NEW ALERT on the top right corner.
Under the Driving alerts, select the "Overspeeding inside object" alert.
Choose the options you need. Read about each option below.
Select where to receive the alert.
Click the Save button at the bottom.

Set up options

Object

Choose one or more existing objects from the dropdown.

The alert only checks for overspeeding inside the selected objects — speeding outside them is ignored.

Speed

Select the speed threshold, in km/h.

The dropdown contains preset values between 10 and 200 km/h (default: 110).

The alert is triggered only when the vehicle's recorded speed is greater than this value.

Speeding for

How long the vehicle must keep exceeding the speed limit (inside the geozone) before the alert is triggered.

Choose one of:

- (default): the alert fires immediately on the first GPS coordinate inside the geozone where the speed exceeds the limit. No sustained duration is required.
1 min, 2 min, 3 min, 4 min, 5 min, 10 min, 15 min — the alert fires only if the vehicle stays above the limit for at least that long, continuously, while inside the geozone.

Additional condition

The "Trigger alerts only for vehicles with active route" is an optional checkbox.

When enabled, the alert is only sent when the vehicle is on a route and its state is driving.

When disabled, the alert is sent regardless of the vehicle's state.

Vehicles

Choose which vehicles the alert applies to.

Three options:

All vehicles — the alert is automatically applied to every vehicle in your account, including any vehicles added later.
Vehicles — pick individual vehicles from the searchable list.
Only the selected vehicles are watched.
Vehicle groups — pick one or more vehicle groups.
All vehicles currently in those groups are watched.

Receive alert

Select where should a notification be sent when the alert is triggered.

Each row is an independent toggle — you can apply multiple options.

To e-mail — sends the alert to the e-mail address of the user creating the alert (your own login e-mail, shown next to the checkbox).
Pop-up window (WEB) — shows a pop-up in the Mapon web platform for users who are logged in when the alert fires.
Manager app notifications — sends a push notification to the Mapon Manager mobile app.
To active driver's phone — sends an SMS to the phone number of the driver assigned to the vehicle at the time of the event.
To active driver's email — sends an e-mail to the e-mail address of the driver assigned to the vehicle at the time of the event.
Show only to me — marks the alert as private. Only the user who created it sees it in the Alerts section.

Additional e-mails

Up to 25 extra e-mail addresses to copy on every alert event.

Click Add to insert more rows.

Additional phones

Up to 25 extra phone numbers to send the SMS to.